UF Membrane Module 10 inch PVC Ultrafiltration Membrane Module UFc250B Noka Phekolo ea Metsi Setšoantšo se Featured

UF Membrane Module 10 inch PVC Ultrafiltration Membrane Module UFc250B Phekolo ea Metsi a Noka

Tlhaloso e Khutšoanyane:

Kakaretso ea Sehlahisoa

UFc250B capillary hollow fiber membrane ke thepa e phahameng ea polymer, e ke keng ea ba le phetoho ea mohato. Lintho tse fetotsoeng tsa PVC, tse amoheloang sehlahisoa sena, li na le sekhahla se setle sa ho kenella, thepa e ntle ea mochini, ho hanyetsa lik'hemik'hale tse ntle le ho hanyetsa tšilafalo. MWCO ke 100K Dalton, membrane ID/OD ke 1.0mm/1.8mm, mofuta oa ho sefa o ka hare-ntle.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Lisebelisoa

Tlhahiso ea metsi a liminerale, metsi a seliba sa thaba le mokelikeli o mong o sa hloekang.
Ho noa kalafo ea metsi a pompo, metsi a holim'a metsi, metsi a seliba, metsi a noka, joalo-joalo.
Phekolo ea pele ea RO.
Phekolo, ho sebelisoa hape le ho sebelisoa hape ha metsi a litšila a indasteri.

Tshebetso ya Filtration

Sehlahisoa sena se netefalitsoe hore se na le litlamorao tse ka tlase tsa ho sefa ho latela maemo a lits'ebeletso tsa mehloli e fapaneng ea metsi:

Motsoako	Phello
SS, Likarolo> 1μm	Sekhahla sa ho Tlosa ≥ 99%
SDI	≤3
Likokoana-hloko, likokoana-hloko	> 4 log
Moferefere	<0.1NTU
TOC	Sekhahla sa ho Tlosa: 0-25%

* Lintlha tse ka holimo li fumanoa tlas'a boemo ba hore ho fepa metsi a mangata ke <15NTU.

Lihlahisoa tsa lihlahisoa

Tekheniki Parameters

Mofuta oa ho Sefa	hare-ntle
Boitsebiso ba Membrane	PVC e fetotsoeng
MWCO	100K Dalton
Sebaka sa Membrane	48m²
Motsoako oa ID/OD	1.0mm/1.8mm
Litekanyo	Φ250mm*1710mm
Boholo ba Khokahanyo	DN50 Clamping

Lintlha tsa Kopo

Phallo e Hloekileng ea Metsi	12,000L/H (0.15MPa, 25℃)
Flux e entsoeng	35-100L/m2.hr (0.15MPa, 25℃)
Khatello ea Mosebetsi e sisintsoeng	≤ 0.2MPa
Khatello e phahameng ea Transmembrane	0.2MPa
Boholo ba Mocheso oa Mosebetsi	45℃
PH Range	Ho sebetsa: 4-10; Ho hlatsoa: 2-12
Mokhoa oa ho sebetsa	Phallano (cross-flow) kapa Lefu-qetellong

Litlhoko tsa ho fepa metsi

Pele o fepa metsi, filthara ea ts'ireletso <50 μm e lokela ho beoa ho thibela thibelo e bakoang ke likaroloana tse kholo metsing a tala.

Moferefere	≤ 15NTU
Oli & Mafura	≤ 2mg/L
SS	≤ 20mg/L
Kakaretso ea Tšepe	≤ 1mg/L
Chlorine e Tsoelang Pele e Tsoelang Pele	≤ 5ppm
COD	E sisintsweng ≤ 500mg/L

* Thepa ea membrane ea UF ke polasetiki e entsoeng ka polymer, ha hoa tlameha ho ba le lihlapi tsa tlhaho metsing a tala.

Li-parameter tse sebetsang

Khatello e phahameng ea ho hlatsoa mokokotlo	0.2MPa
Backwashing Flow Rate	100-150L/m².hr
Ho Hlatsoa Mokokotlo	Nako le nako 30-60min.
Nako ea ho Hlatsoa Mokokotlo	30-60s
CEB Frequency	0-4 linako tse ling ka letsatsi
CEB Nako	5-10mins.
CIP khafetsa	Likhoeli tse ling le tse ling tse 1-3
Lik'hemik'hale Tse Hlatsoang:
Ho nyopa	15ppm sodium Hypochlorite
Ho Hlatsoa tšilafalo ea Lintho	0.2% Sodium Hypochlorite + 0.1% Sodium Hydrooxide
Ho Hlatsoa ha Tšilafalo e sa Hlatsoang	1-2% Citric Acid / 0.2% Hydrochloric Acid