MBR Membrane Module e Matlafalitsoeng PVDF BM-SLMBR-25 Phekolo ea Metsi a Litšila
Kakaretso ea Sehlahisoa
MBR ke motsoako oa theknoloji ea membrane le karabelo ea lik'hemik'hale tsa biochemical kalafo ea metsi.MBR sefa likhoerekhoere ka tankeng ea bio-chemical e nang le lera hore seretse le metsi li arohane.Ka lehlakoreng le leng, lera le hana likokoana-hloko ka tanka, e leng se eketsang haholo mohopolo oa seretse se kentsoeng ho ea boemong bo phahameng, kahoo ts'ebetso ea lik'hemik'hale tsa lik'hemik'hale tsa lits'ebetso tsa likhoerekhoere ka potlako le ka botlalo.Ka lehlakoreng le leng, tlhahiso ea metsi e hlakile ebile ke ea boleng bo holimo ka lebaka la ho nepahala ho phahameng ha lera.
Sehlahisoa sena se nka lisebelisoa tse matlafalitsoeng tsa PVDF, tse ke keng tsa ebola kapa tsa robeha ha ho hlatsuoa ka morao, ha ho ntse ho e-na le sekhahla se setle sa ho kenella, ts'ebetso ea mochini, ho hanyetsa lik'hemik'hale le ho hanyetsa tšilafalo.ID & OD ea membrane e matlafalitsoeng e nang le sekoti ke 1.0mm le 2.2mm ka ho latellana, ho nepahala ha filtration ke 0.1 micron.Mokhoa oa ho hloekisa o ka ntle, ke hore metsi a tala, a tsamaisoang ke khatello e fapaneng, a kenella ka har'a likhoele tse se nang letho, ha libaktheria, li-colloid, li-solids tse emisitsoeng le likokoana-hloko joalo-joalo li lahliloe ka tanka ea membrane.
Lisebelisoa
● Ho phekola, ho sebelisoa hape le ho sebelisoa hape ha metsi a litšila a indasteri.
● Phekolo ea leachate ea lithōle.
● Ho ntlafatsa le ho sebelisa hape likhoerekhoere tsa 'masepala.
Tshebetso ya Filtration
| Che. | Ntho | Index ea Phallo ea Metsi |
| 1 | TSS | ≤1mg/L |
| 2 | Moferefere | ≤1 |
Litlhaloso
Boholo
Tekheniki Parameters
| Sebopeho | Kantle-ka hare |
| Boitsebiso ba Membrane | PVDF e Matlafalitsoeng e Matlafalitsoeng |
| Nepahalo | 0.1 micron |
| Sebaka sa Membrane | 25m2 |
| Motsoako oa ID/OD | 1.0mm/2.2mm |
| Boholo | 785mm×2000mm×40mm |
| Boholo bo Kopanetsoeng | DN32 |
Boitsebiso ba Karolo
| Karolo | Lintho tse bonahalang |
| Membrane ea Fiber e se nang letho | PVDF e Matlafalitsoeng e Matlafalitsoeng |
| Motsoako oa ho Tiisa | Epoxy Resins + Polyurethane (PU) |
| Matlo | ABS |
Lisebelisoa tsa Parameters
| Flux e entsoeng | 10~25L/m2.h |
| Flux ea ho hlatsoa mokokotlo | 30~60L/m2.h |
| Mocheso oa ho sebetsa | 5 ~ 45°C |
| Khatello e Phahameng ea Ts'ebetso | -50KPa |
| Khatello ea Ts'ebetso e sisintsoeng | 0~-35KPa |
| Maximum backwashingPressure | 100KPa |
| Mokhoa oa ho sebetsa | 9min Ts'ebetso+1min Break/8min Ts'ebetso+2min Break |
| Mokhoa oa ho letsa | Moea o Tsoelang Pele |
| Sekhahla sa Moea | 4m3/h.pc |
| Nako ea ho Hlatsoa | Ho hlatsoa metsi a hloekileng ka mor'a lihora tse 2-4;CEB libeke tse ling le tse ling tsa 2 ~ 4;CIP likhoeli tse ling le tse ling tse 6-12 |
Ho Sebelisa Maemo
Ho lokela ho ba le liphekolo tse nepahetseng pele ho UF.Haeba defoamer e tlameha ho sebelisoa, ka kopo khetha defoamer ea joala, silicone defoamer e thibetsoe.
| Ntho | Boleng |
| PH Range | 5~9 (ho hlatsoa: 2~12) |
| Boholo ba Karolo | <2mm, ha ho na likaroloana tse bohale |
| Oli & Mafura | ≤2mg/L |
| Ho thatafala | ≤150mg/L |
