UF Membrane Module 4 inch PVC Ultrafiltration Membrane Module UFc90AL Kalafo ea Metsi a Tap

Tlhaloso e Khutšoanyane:

Kakaretso ea Sehlahisoa

UFc90AL capillary hollow fiber membrane ke thepa e phahameng ea polymer, e ke keng ea ba le phetoho ea mohato.Lintho tse fetotsoeng tsa PVC, tse amoheloang sehlahisoa sena, li na le sekhahla se setle sa ho kenella, thepa e ntle ea mochini, ho hanyetsa lik'hemik'hale tse ntle le ho hanyetsa tšilafalo.MWCO ke 100K Dalton, membrane ID/OD ke 1.0mm/1.8mm, mofuta oa ho sefa o ka hare-ntle.


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Lisebelisoa

Tlhahiso ea metsi a nang le liminerale, metsi a selemo, kapa metsi a mang a sa hloekang.
Ho noa kalafo ea metsi a pompo, metsi a holim'a metsi, metsi a seliba le metsi a noka.
Phekolo ea pele ea RO.
Phekolo, ho sebelisoa hape le ho sebelisoa hape ha metsi a litšila a indasteri.

Tshebetso ya Filtration

Sehlahisoa sena se netefalitsoe hore se na le litlamorao tse ka tlase tsa ho sefa ho latela maemo a lits'ebeletso tsa mehloli e fapaneng ea metsi:

Motsoako Phello
SS, Likarolo> 1μm Sekhahla sa ho Tlosa ≥ 99%
SDI ≤3
Likokoana-hloko, likokoana-hloko > 4 log
Moferefere <0.1NTU
TOC Sekhahla sa ho Tlosa: 0-25%

* Lintlha tse ka holimo li fumanoa tlas'a boemo ba hore ho fepa metsi a mangata ke <15NTU.Sehlahisoa sena se tšoaneleha bakeng sa lihlahisoa tse amanang le metsi a nooang.

Lihlahisoa tsa lihlahisoa

tlhaloso ea sehlahisoa1

Tekheniki Parameters

Mofuta oa ho Sefa Hare-ntle
Boitsebiso ba Membrane PVC e fetotsoeng
MWCO 100K Dalton
Sebaka sa Membrane 4.8m2
Motsoako oa ID/OD 1.0mm/1.8mm
Litekanyo Φ90mm*1190mm
Boholo ba Khokahanyo DN25 Union Joint

Lintlha tsa Kopo

Phallo e Hloekileng ea Metsi 1,500L/H (0.15MPa, 25C)
Flux e entsoeng 35-100L/m2.hr (0.15MPa, 25C)
Khatello ea Mosebetsi e sisintsoeng ≤ 0.2MPa
Khatello e phahameng ea Transmembrane 0.2MPa
Boholo ba Mocheso oa Mosebetsi 45C
PH Range Ho sebetsa: 4-10;Ho hlatsoa: 2-12
Mokhoa oa ho sebetsa Phallano (cross-flow) kapa Lefu-qetellong

Litlhoko tsa ho fepa metsi

Pele o fepa metsi, filthara ea ts'ireletso <50 μm e lokela ho beoa ho thibela thibelo e bakoang ke likaroloana tse kholo metsing a tala.

Moferefere ≤ 15NTU
Oli & Mafura ≤ 2mg/L
SS ≤ 20mg/L
Kakaretso ea Tšepe ≤ 1mg/L
Chlorine e Tsoelang Pele e Tsoelang Pele ≤ 5ppm
COD E sisintsweng ≤ 500mg/L

* Thepa ea membrane ea UF ke polasetiki e entsoeng ka polymer, ha hoa tlameha ho ba le lihlapi tsa tlhaho metsing a tala.

Li-parameter tse sebetsang

Khatello e phahameng ea ho hlatsoa mokokotlo 0.2MPa
Backwashing Flow Rate 100-150L/m2.hr
Ho Hlatsoa Mokokotlo Nako le nako 30-60min.
Nako ea ho Hlatsoa Mokokotlo 30-60s
CEB Frequency 0-4 linako tse ling ka letsatsi
CEB Nako 5-10mins.
CIP khafetsa Likhoeli tse ling le tse ling tse 1-3
Lik'hemik'hale Tse Hlatsoang:
Ho nyopa 15ppm sodium Hypochlorite
Ho Hlatsoa tšilafalo ea Lintho 0.2% Sodium Hypochlorite + 0.1% Sodium Hydrooxide
Ho Hlatsoa ha Tšilafalo e sa Hlatsoang 1-2% Citric Acid / 0.2% Hydrochloric Acid

Boitsebiso ba Karolo

Karolo Lintho tse bonahalang
Metsoako PVC e fetotsoeng
Ho tiisa Li-resin tsa epoxy
Matlo UPVC

 

 


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona