PVDF Ultrafiltration Membrane Module UFf157 Stainless Steel Housing for Whole House Membrane Housing

Tlhaloso e Khutšoanyane:

UFF157 capillary hollow fiber membrane ke thepa e phahameng ea polymer, e ke keng ea ba le phetoho ea mohato. Lintho tse fetotsoeng tsa PVDF, tse amoheloang sehlahisoa sena, li na le sekhahla se setle sa ho kenella, thepa e ntle ea mochini, ho hanyetsa lik'hemik'hale tse ntle le ho hanyetsa tšilafalo. MWCO ke 200K Dalton, membrane ID/OD ke 1.0mm/2.2mm, mofuta oa ho sefa o ka ntle.


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Lisebelisoa

Phekolo ea metsi a nooang a metsi a pompo, metsi a holim'a metsi, metsi a seliba le metsi a noka;
Phekolo ea pele ea RO;
Phekolo, ho sebelisoa hape le ho sebelisoa hape ha metsi a litšila a indasteri.

Tshebetso ya Filtration

Sehlahisoa sena se netefalitsoe hore se na le litlamorao tse ka tlase tsa ho sefa ho latela maemo a lits'ebeletso tsa mehloli e fapaneng ea metsi:

Motsoako Phello
SS, Likarolo> 1μm Sekhahla sa ho Tlosa ≥ 99%
SDI ≤3
Likokoana-hloko, likokoana-hloko > 4 log
Moferefere <1NTU
TOC Sekhahla sa ho Tlosa: 0-25%

* Lintlha tse ka holimo li fumanoa tlas'a boemo ba hore ho fepa metsi a mangata ke <25NTU.

Lihlahisoa tsa lihlahisoa

1

Tekheniki Parameters

Mofuta oa ho Sefa Kantle-ka hare
Boitsebiso ba Membrane PVDF e fetotsoeng
MWCO 200K Dalton
Sebaka sa Membrane 77m2
Motsoako oa ID/OD 0.8mm/1.3mm
Litekanyo Φ225mm*2360mm
Boholo ba Khokahanyo DN50 Clamping; Air Inlet - phala ea moea ea 10mm

Lintlha tsa Kopo

Phallo e Hloekileng ea Metsi 3,500L/H (0.15MPa, 25℃)
Flux e entsoeng 35-100L/m2.hr (0.15MPa, 25℃)
Khatello ea Mosebetsi e sisintsoeng ≤ 0.2MPa
Khatello e phahameng ea Transmembrane 0.15MPa
Khatello e phahameng ea ho hlatsoa mokokotlo 0.15MPa
Molumo oa ho Hlatsoa Moea 0.1-0.15N m3/m2.hr
Khatello ea ho Hlatsoa Moea ≤ 0.1MPa
Boholo ba Mocheso oa Mosebetsi 45℃
PH Range Ho sebetsa: 4-10; Ho hlatsoa: 2-12
Mokhoa oa ho sebetsa Cross Flow kapa Dead-end

Litlhoko tsa ho fepa metsi

Pele o fepa metsi, filthara ea ts'ireletso <50μm e lokela ho beoa ho thibela thibelo e bakoang ke likaroloana tse kholo metsing a tala.

Moferefere ≤ 25NTU
Oli & Mafura ≤ 2mg/L
SS ≤ 20mg/L
Kakaretso ea Tšepe ≤ 1mg/L
Chlorine e Tsoelang Pele e Tsoelang Pele ≤ 5ppm
COD E sisintsweng ≤ 500mg/L

* Thepa ea membrane ea UF ke polasetiki e entsoeng ka polymer, ha hoa tlameha ho ba le lihlapi tsa tlhaho metsing a tala.

Li-parameter tse sebetsang

Backwashing Flow Rate 100-150L/m2.hr
Ho Hlatsoa Mokokotlo Nako le nako 30-60min.
Nako ea ho Hlatsoa Mokokotlo 30-60s
CEB Frequency 0-4 linako tse ling ka letsatsi
CEB Nako 5-10mins.
CIP khafetsa Likhoeli tse ling le tse ling tse 1-3
Lik'hemik'hale Tse Hlatsoang:
Ho nyopa 15ppm sodium Hypochlorite
Ho Hlatsoa tšilafalo ea Lintho 0.2% Sodium Hypochlorite + 0.1% Sodium Hydrooxide
Ho Hlatsoa ha Tšilafalo e sa Hlatsoang 1-2% Citric Acid / 0.2% Hydrochloric Acid

Boitsebiso ba Karolo

Karolo Lintho tse bonahalang
Metsoako PVDF e matlafalitsoeng
Ho tiisa Li-resin tsa epoxy
Matlo UPVC

  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona