UF Membrane Module PVC Ultrafiltration Membrane Module UFc4040 RO housing

Tlhaloso e Khutšoanyane:

Kakaretso ea Sehlahisoa

UFc4040 capillary hollow fiber membrane ke lisebelisoa tse phahameng tsa polymer, tse ke keng tsa ba le phetoho ea mohato. Lintho tse fetotsoeng tsa PVC, tse amoheloang sehlahisoa sena, li na le sekhahla se setle sa ho kenella, thepa e ntle ea mochini, ho hanyetsa lik'hemik'hale tse ntle le ho hanyetsa tšilafalo. MWCO ke 100K Dalton, membrane ID/OD ke 1.0mm/1.8mm, mofuta oa ho sefa o ka hare-ntle.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Lisebelisoa

Tlhahiso ea metsi a nang le liminerale, metsi a selemo, kapa metsi a mang a sa hloekang.
Ho noa kalafo ea metsi a pompo, metsi a holim'a metsi, metsi a seliba le metsi a noka.
Phekolo ea pele ea RO.
Phekolo, ho sebelisoa hape le ho sebelisoa hape ha metsi a litšila a indasteri.

Tshebetso ya Filtration

Sehlahisoa sena se netefalitsoe hore se na le litlamorao tse ka tlase tsa ho sefa ho latela maemo a lits'ebeletso tsa mehloli e fapaneng ea metsi:

Motsoako	Phello
SS, Likarolo> 1μm	Sekhahla sa ho Tlosa ≥ 99%
SDI	≤3
Likokoana-hloko, likokoana-hloko	> 4 log
Moferefere	<0. 1NTU
TOC	Sekhahla sa ho Tlosa: 0-25%

* Lintlha tse ka holimo li fumanoa tlas'a boemo ba hore ho fepa metsi a mangata ke <15NTU. Sehlahisoa sena se tšoaneleha bakeng sa lihlahisoa tse amanang le metsi a nooang.

Lihlahisoa tsa lihlahisoa

tlhaloso ea sehlahisoa1

Tekheniki Parameters

Mofuta oa ho Sefa	hare-ntle
Boitsebiso ba Membrane	PVC e fetotsoeng
MWCO	100K Dalton
Sebaka sa Membrane	3.8m²
Motsoako oa ID/OD	1.0mm/1.8mm
Litekanyo	Φ90mm*1016mm
Boholo ba Khokahanyo	Φ19 limilimithara

Lintlha tsa Kopo

Phallo e Hloekileng ea Metsi	1,200L/H (0.15MPa, 25℃)
Flux e entsoeng	35-100L/m².hr (0.15MPa, 25℃)
Khatello ea Mosebetsi e sisintsoeng	≤ 0.2MPa
Khatello e phahameng ea Transmembrane	0.2MPa
Boholo ba Mocheso oa Mosebetsi	45℃
PH Range	Ho sebetsa: 4-10; Ho hlatsoa: 2-12
Mokhoa oa ho sebetsa	Phallano (cross-flow) kapa Lefu-qetellong

Litlhoko tsa ho fepa metsi

Pele o fepa metsi, filthara ea ts'ireletso <50 μm e lokela ho beoa ho thibela thibelo e bakoang ke likaroloana tse kholo metsing a tala.

Moferefere	≤ 15NTU
Oli & Mafura	≤ 2mg/L
SS	≤ 20mg/L
Kakaretso ea Tšepe	≤ 1mg/L
Chlorine e Tsoelang Pele e Tsoelang Pele	≤ 5ppm
COD	E sisintsweng ≤ 500mg/L

* Thepa ea membrane ea UF ke polasetiki e entsoeng ka polymer, ha hoa tlameha ho ba le lihlapi tsa tlhaho metsing a tala.

Li-parameter tse sebetsang

Khatello e phahameng ea ho hlatsoa mokokotlo	0.2MPa
Backwashing Flow Rate	100-150L/m².hr
Ho Hlatsoa Mokokotlo	Nako le nako 30-60min.
Nako ea ho Hlatsoa Mokokotlo	30-60s
CEB Frequency	0-4 linako tse ling ka letsatsi
CEB Nako	5-10mins.
CIP khafetsa	Likhoeli tse ling le tse ling tse 1-3
Lik'hemik'hale Tse Hlatsoang:
Ho nyopa	15ppm sodium Hypochlorite
Ho Hlatsoa tšilafalo ea Lintho	0.2% Sodium Hypochlorite + 0.1% Sodium Hydrooxide
Ho Hlatsoa ha Tšilafalo e sa Hlatsoang	1-2% Citric Acid / 0.2% Hydrochloric Acid