MCR Membrane Module e Matlafalitsoeng PVDF BM-SLMCR-20 RO Pretreatment
Kakaretso ea Sehlahisoa
Theknoloji ea Submerged ultrafiltration (MCR) ke theknoloji ea ho hloekisa metsi e kopanyang theknoloji ea membrane le ts'ebetso ea physico-chemical precipitation. Karohano e nepahetseng ea metsi a seretse se phahameng ka ho fetesisa e tsoang tanka ea coagulation sedimentation e ka etsoa ka submerged ultrafiltration (MCR), ho nepahala ho phahameng ho sefa ha memrbane ho netefatsa boleng bo holimo le phallo ea metsi e hlakileng.
Sehlahisoa sena se amohela lisebelisoa tse matlafalitsoeng tsa PVDF, tse ke keng tsa ebola kapa tsa robeha nakong ea ho hlatsuoa ka morao, ha ho ntse ho le joalo, e na le sekhahla se setle sa ho kenella, ts'ebetso ea mochini, ho hanyetsa lik'hemik'hale le bokhoni ba ho thibela litšila. ID & OD ea membrane e matlafalitsoeng e nang le sekoti ke 1.0mm le 2.2mm ka ho latellana, ho nepahala ha sefa ke 0.03 micron. Tataiso ea ho sefa e ka ntle, ke hore metsi a tala, a tsamaisoang ke khatello e fapaneng, a kenella ka har'a likhoele tse se nang letho, ha libaktheria, li-colloid, li-solids tse emisitsoeng le likokoana-hloko joalo-joalo li lahliloe ka har'a tanka ea membrane.
Lisebelisoa
● Ho hloekisa metsi a holim'a metsi;
● Ho sebelisoa hape ha metsi a litšila a tšepe e boima;
● Phekolo ea Pele ea RO.
Tshebetso ya Filtration
Litlamorao tse ka tlase tsa filthara li pakoa ho latela ts'ebeliso ea membrane e fetotsoeng ea PVDF hollow fiber ultrafiltration mefuteng e fapaneng ea metsi:
| Che. | Ntho | index ea metsi a tsoang |
| 1 | TSS | ≤1mg/L |
| 2 | Moferefere | ≤1 |
Litlhaloso
Size
Chate 1 MBR Boholo
Theknoloji Pli-arameter:
| Tsela ea ho Sefa | Kantle-ka hare |
| Boitsebiso ba Membrane | PVDF e Matlafalitsoeng e Matlafalitsoeng |
| Nepahalo | 0.03 micron |
| Sebaka sa Membrane | 20m2 |
| Motsoako oa ID/OD | 1.0mm/2.2mm |
| Boholo | 785mm×1510mm×40mm |
| Boholo bo Kopanetsoeng | DN32 |
Motsoallet Boitsebiso:
| Karolo | Lintho tse bonahalang |
| Metsoako | PVDF e Matlafalitsoeng e Matlafalitsoeng |
| Ho tiisa | Epoxy Resins + Polyurethane (PU) |
| Matlo | ABS |
Ho sebelisa Maemo
Liphekolo tse nepahetseng li tlameha ho hlophisoa ha metsi a tala a na le litšila tse ngata / likaroloana tse mahoashe kapa karolo e kholo ea mafura. Defoamer e tlameha ho sebelisoa ho tlosa foam ka tanka ea membrane ha ho hlokahala, ka kopo sebelisa defoamer e tahang eo ho seng bonolo ho e lekanya.
| Ntho | Moeli | Ela hloko |
| PH Range | 5-9 (2-12 ha u hlatsoa) | PH e sa nke lehlakore e betere bakeng sa setso sa baktheria |
| Particle Diameter | <2 limilimithara | Thibela likaroloana tse bohale hore li se ke tsa ngoaea lera |
| Oli & Mafura | ≤2mg/L | Thibela ho silafala ha membrane / ho fokotseha ho hoholo ha phallo |
| Ho thatafala | ≤150mg/L | Thibela ho eketseha ha membrane |
Apboikopanyo Litlhophiso:
| Flux e entsoeng | 15~40L/m2.hr |
| Flux ea ho hlatsoa mokokotlo | Habeli flux e entsoeng |
| Mocheso oa ho sebetsa | 5 ~ 45°C |
| Khatello e Phahameng ea Ts'ebetso | -50KPa |
| Khatello ea Ts'ebetso e sisintsoeng | ≤-35KPa |
| Maximum backwashing Khatello | 100KPa |
| Mokhoa oa ho sebetsa | Ts'ebetso e tsoelang pele, ho hlatsuoa ha moea ka nakoana |
| Mokhoa oa ho letsa | Moea o Tsoelang Pele |
| Sekhahla sa Moea | 4m3/h.sekotoana |
| Nako ea ho Hlatsoa | Ho hlatsoa metsi a hloekileng ka mor'a lihora tse 1-2; CEB ka matsatsi a mang le a mang a 1 ~ 2; Ho hlatsoa kantle ho marang-rang likhoeling tse ling le tse ling tse 6 ~ 12 |
