● Tlhahiso ea metsi a nang le liminerale, metsi a seliba sa thaba le mokelikeli o mong o se nang likokoana-hloko.
● Ho noa metsi a pompo, metsi a holim'a metsi, metsi a seliba le metsi a linōka.
● Phekolo ea pele ea sesebelisoa sa RO.
● Phekolo, ho sebelisoa hape le ho sebelisoa hape ha metsi a litšila a indasteri.
Ho latela maemo a ts'ebeletso ea membrane e fetotsoeng ea PVC hollow fiber ultrafiltration e sebelisoang mehloling e fapaneng ea metsi, sehlahisoa se netefalitsoe hore se fihlella litlamorao tse ka tlase tsa filtration:
Sebopeho sa Metsi | Phello ea ho Sefa |
Lintho tse Emisoang, Likarolo>1um | Sekhahla sa ho Tlosa ≥99% |
SDI | ≤3 |
Kokoana, Baktheria | >4 log |
Moferefere | <0.1NTU |
TOC | Sekhahla sa ho Tlosa 0-25% |
Lintlha tse ka holimo li fumanoa ha turbidity ea metsi a fepa e le ka tlase ho 15NTU. Sehlahisoa se netefalitsoe hore se fihlella maemo a bohloeki a metsi a nooang ke Lefapha la Bophelo la Profinse ea Guangdong. Nomoro ea tumello ke YUE WEI SHUI ZI 2014 S1671.
Ponahalo ea Sehlahisoa
Setšoantšo sa 1 Litekanyo tsa Lihlahisoa
Sebopeho | hare-ntle |
Boitsebiso ba Membrane | PVC e fetotsoeng |
MWCO | 100K Dalton |
Sebaka sa Nominal Membrane | 16.5m2 |
Motsoako oa ID/OD | 1.0mm/1.8mm |
Litekanyo tsa Module | Φ180mm×1382mm |
Litekanyo tsa sehokelo | DN25 Female Thread |
Phallo e Hloekileng ea Metsi | 7,000L/H (0.15MPa, 25℃) |
Flux e entsoeng | 35-100L/H (0.15MPa, 25℃) |
Khatello ea Ts'ebetso | ≤0.2MPa |
Khatello e phahameng ea Trans Membrane | 0.2MPa |
Mocheso o Moholo oa ho sebetsa | 45℃ |
Ts'ebetso ea PH Range | 4-10 |
Ho hlatsoa PH Range | 2-12 |
Mokhoa oa ho sebetsa | Cross-flow/ Ketsiso e shoeleng |
Setlhopha sa tshireletso, precision <50 micron, se lokela ho bewa e le phetisetso ya UF, haeba ho na le thibelo e bakilweng ke likaroloana tse kholo metsing a tala. Tlhokomeliso: UF membrane material ke macromolecular organic plastics, metsi a tala ha aa lokela ho ba le lihlaseli tsa tlhaho.
Fepa Moferefere oa Metsi | ≤15NTU |
Oli & Mafura | ≤2mg/L |
Fepa Metsi SS | ≤20mg/L |
Kakaretso ea Tšepe | ≤1mg/L |
Phepelo e Tsoelang Pele ea Masala a Chlorine | ≤5ppm |
COD | E sisintsweng ≤500mg/L |
Karolo | Lintho tse bonahalang |
Metsoako | PVC e fetotsoeng |
Ho tiisa | Li-resin tsa epoxy |
Matlo | SUS304 |
Khatello e phahameng ea ho hlatsoa mokokotlo | 0.2MPa | |
Backwashing Flow Rate | 100-150L/m2 .h | |
Ho Hlatsoa Mokokotlo | Metsotso e meng le e meng e 30-60 | |
Nako ea ho Hlatsoa Mokokotlo | 30-60 metsotsoana | |
CEB Frequency | 0-4 linako / letsatsi | |
CEB Nako | Metsotso e 5-10 | |
CIP khafetsa | Likhoeli tse 1-3 | |
Likhemikhale tse Hlatsoang Kakaretso : | ||
Ho bolaea likokoana-hloko | 15ppm NaClO | |
Ho Hlatsoa ho Silafatsoa ka Likokoana-hloko | 0.2% NaClo+0.1% NaOH | |
Ho Hlatsoa ka Tšilafalo ea Inorganic | 1-2% Citric Acid /0.2% HCl |