UF Membrane Module 8 inch PVC Ultrafiltration Membrane Module UFc200BL Phekolo ea Metsi a Merafo

Tlhaloso e Khutšoanyane:

● Likhoele tse sekoti li arotsoe ka likarolo tse 3, 'me li abela karolo e 'ngoe le e 'ngoe ea metsi a hlatsuoang ka mokhoa o leka-lekaneng, e leng se etsang hore ho hlatsoe mokokotlo hantle;

● Sebopeho sa tšepe e sa hloekang sa 304 se fana ka mamello e phahameng ea khatello, e thibela ka katleho litsamaiso tse kholo tsa UF hore li se ke tsa peperana le ho lutla ka lebaka la khatello e phahameng hang-hang le tšusumetso;

● Boholo ba sehokelo se tloaelehileng, ho kenya habonolo;


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Kakaretso ea Sehlahisoa

UFc200BL capillary hollow fiber membrane ke lisebelisoa tse phahameng tsa polymer, tse ke keng tsa ba le phetoho ea mohato. Lintho tse fetotsoeng tsa PVC, tse amoheloang sehlahisoa sena, li na le sekhahla se setle sa ho kenella, thepa e ntle ea mochini, ho hanyetsa lik'hemik'hale tse ntle le ho hanyetsa tšilafalo. MWCO ke 100K Dalton, membrane ID/OD ke 1.0mm/1.8mm, mofuta oa ho sefa o ka hare-ntle.

Lisebelisoa

  • Tlhahiso ea metsi a liminerale, metsi a seliba sa thaba le mokelikeli o mong o sa hloekang.
  • Ho noa kalafo ea metsi a pompo, metsi a holim'a metsi, metsi a seliba, metsi a noka, joalo-joalo.
  • Phekolo ea pele ea RO.
  • Phekolo, ho sebelisoa hape le ho sebelisoa hape ha metsi a litšila a indasteri.

Tshebetso ya Filtration

Sehlahisoa sena se netefalitsoe hore se na le litlamorao tse ka tlase tsa ho sefa ho latela maemo a lits'ebeletso tsa mehloli e fapaneng ea metsi:

Motsoako Phello
SS, Likarolo> 1μm Sekhahla sa ho Tlosa ≥ 99%
SDI ≤3
Likokoana-hloko, likokoana-hloko > 4 log
Moferefere <0.1NTU
TOC Sekhahla sa ho Tlosa: 0-25%

* Lintlha tse ka holimo li fumanoa tlas'a boemo ba hore ho fepa metsi a mangata ke <15NTU.

Lihlahisoa tsa lihlahisoa

tlhaloso ea sehlahisoa1

Litekanyetso tsa Tekheniki:

Mofuta oa ho Sefa hare-ntle
Boitsebiso ba Membrane PVC e fetotsoeng
MWCO 100K Dalton
Sebaka sa Membrane 34m2
Motsoako oa ID/OD 1.0mm/1.8mm
Litekanyo Φ200mm*1710mm
Boholo ba Khokahanyo DN50 Clamping

Lintlha tsa Kopo:

Phallo e Hloekileng ea Metsi 10,000L/H (0.15MPa, 25℃)
Flux e entsoeng 35-100L/m2.hr (0.15MPa, 25℃)
Khatello ea Mosebetsi e sisintsoeng ≤ 0.2MPa
Khatello e phahameng ea Transmembrane 0.2MPa
Boholo ba Mocheso oa Mosebetsi 45℃
PH Range Ho sebetsa: 4-10; Ho hlatsoa: 2-12
Mokhoa oa ho sebetsa Phallano (cross-flow) kapa Lefu-qetellong

Litlhoko tsa ho fepa ka metsi:
Pele o fepa metsi, filthara ea ts'ireletso <50 μm e lokela ho beoa ho thibela thibelo e bakoang ke likaroloana tse kholo metsing a tala.

Moferefere ≤ 15NTU
Oli & Mafura ≤ 2mg/L
SS ≤ 20mg/L
Kakaretso ea Tšepe ≤ 1mg/L
Chlorine e Tsoelang Pele e Tsoelang Pele ≤ 5ppm
COD E sisintsweng ≤ 500mg/L

* Thepa ea membrane ea UF ke polasetiki e entsoeng ka polymer, ha hoa tlameha ho ba le lihlapi tsa tlhaho metsing a tala.

Li-parameter tsa ts'ebetso:

Khatello e phahameng ea ho hlatsoa mokokotlo 0.2MPa
Backwashing Flow Rate 100-150L/m2.hr
Ho Hlatsoa Mokokotlo Nako le nako 30-60min.
Nako ea ho Hlatsoa Mokokotlo 30-60s
CEB Frequency 0-4 linako tse ling ka letsatsi
CEB Nako 5-10mins.
CIP khafetsa Likhoeli tse ling le tse ling tse 1-3
Lik'hemik'hale Tse Hlatsoang:
Ho nyopa 15ppm sodium Hypochlorite
Ho Hlatsoa tšilafalo ea Lintho 0.2% Sodium Hypochlorite + 0.1% Sodium Hydrooxide
Ho Hlatsoa ha Tšilafalo e sa Hlatsoang 1-2% Citric Acid / 0.2% Hydrochloric Acid

Lisebelisoa tsa likarolo:

Karolo Lintho tse bonahalang
Metsoako PVC e fetotsoeng
Ho tiisa Li-resin tsa epoxy
Matlo UPVC

  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona