MCR Membrane Module e Matlafalitsoeng PVDF BM-SLMCR-30 E Nchafatsa Morero oa Setšoantšo se Felletseng

MCR Membrane Module e Matlafalitsoeng PVDF BM-SLMCR-30 Replace Project

Tlhaloso e Khutšoanyane:

Kakaretso ea Sehlahisoa

Theknoloji ea Submerged ultrafiltration (MCR) ke theknoloji ea ho hloekisa metsi e kopanyang theknoloji ea membrane le ts'ebetso ea physico-chemical precipitation. Karohano e nepahetseng ea metsi a seretse se phahameng ka ho fetesisa e tsoang tanka ea coagulation sedimentation e ka etsoa ka submerged ultrafiltration (MCR), ho nepahala ho phahameng ho sefa ha memrbane ho netefatsa boleng bo holimo le phallo ea metsi e hlakileng.

Sehlahisoa sena se amohela lisebelisoa tse matlafalitsoeng tsa PVDF, tse ke keng tsa ebola kapa tsa robeha nakong ea ho hlatsuoa ka morao, ha ho ntse ho le joalo, e na le sekhahla se setle sa ho kenella, ts'ebetso ea mochini, ho hanyetsa lik'hemik'hale le bokhoni ba ho thibela litšila. ID & OD ea membrane e matlafalitsoeng e nang le sekoti ke 1.0mm le 2.2mm ka ho latellana, ho nepahala ha sefa ke 0.03 micron. Tataiso ea ho sefa e ka ntle, ke hore metsi a tala, a tsamaisoang ke khatello e fapaneng, a kenella ka har'a likhoele tse se nang letho, ha libaktheria, li-colloid, li-solids tse emisitsoeng le likokoana-hloko joalo-joalo li lahliloe ka har'a tanka ea membrane.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Lisebelisoa

● Ho hloekisa metsi a ka holimo.
● Ho sebelisoa hape ha metsi a litšila a tšepe e boima.
● Phekolo ea Pele ea RO.

Tshebetso ya Filtration

Litlamorao tse ka tlase tsa filthara li pakoa ho latela ts'ebeliso ea membrane e fetotsoeng ea PVDF hollow fiber ultrafiltration mefuteng e fapaneng ea metsi:

Che.	Ntho	index ea metsi a tsoang
1	TSS	≤1mg/L
2	Moferefere	≤1

Litlhaloso

Boholo

tlhaloso ea sehlahisoa1

Chate 1 MBR Boholo

Tekheniki Parameters

Tsela ea ho Sefa	Kantle-ka hare
Boitsebiso ba Membrane	PVDF e Matlafalitsoeng e Matlafalitsoeng
Nepahalo	0.03 micron
Sebaka sa Membrane	30m²
Motsoako oa ID/OD	1.0mm/2.2mm
Boholo	1250mm×2000mm×30mm
Boholo bo Kopanetsoeng	Φ24.5 limilimithara

Boitsebiso ba Karolo

Karolo	Lintho tse bonahalang
Metsoako	PVDF e Matlafalitsoeng e Matlafalitsoeng
Ho tiisa	Epoxy Resins + Polyurethane (PU)
Matlo	ABS

Ho Sebelisa Maemo

Liphekolo tse nepahetseng li tlameha ho hlophisoa ha metsi a tala a na le litšila tse ngata / likaroloana tse mahoashe kapa karolo e kholo ea mafura. Defoamer e tlameha ho sebelisoa ho tlosa foam ka tanka ea membrane ha ho hlokahala, ka kopo sebelisa defoamer e tahang eo ho seng bonolo ho e lekanya.

Ntho	Moeli	Ela hloko
PH Range	5-9 (2-12 ha u hlatsoa)	PH e sa nke lehlakore e betere bakeng sa setso sa baktheria
Particle Diameter	<2 limilimithara	Thibela likaroloana tse bohale hore li se ke tsa ngoaea lera
Oli & Mafura	≤2mg/L	Thibela ho silafala ha membrane / ho fokotseha ho hoholo ha phallo
Ho thatafala	≤150mg/L	Thibela ho eketseha ha membrane

Lisebelisoa tsa Parameters

Flux e entsoeng	15~40L/m².hr
Flux ea ho hlatsoa mokokotlo	Habeli flux e entsoeng
Mocheso oa ho sebetsa	5 ~ 45 ℃
Khatello e Phahameng ea Ts'ebetso	-50KPa
Khatello ea Ts'ebetso e sisintsoeng	≤-35KPa
Maximum backwashing Khatello	100KPa
Mokhoa oa ho sebetsa	Ts'ebetso e tsoelang pele, ho hlatsuoa ha moea ka nakoana
Mokhoa oa ho letsa	Moea o Tsoelang Pele
Sekhahla sa Moea	4m³/h.sekotoana
Nako ea ho Hlatsoa	Ho hlatsoa metsi a hloekileng ka mor'a lihora tse 1-2; CEB ka matsatsi a mang le a mang a 1 ~ 2; Ho hlatsoa kantle ho marang-rang likhoeling tse ling le tse ling tse 6 ~ 12